435 Four Valley Drive,Unit 4
Concord, Ontario, L4K 5X5
Fastening profiles to assemble 3/4" panels into cubes of various shapes.
CubeConnects are designed to assemble 3/4" thick panels into various shapes, such as squares, rectangles, equal sided triangles, right angle triangles, octagons and combinations of these. See diagrams. Standard 72" lengths; angles are based on inside degrees of measure. The panel assembly is accomplished by running a 1/8" saw cut or kerf on the panel's vertical edge. This kerf is cut about 7/8"on center from the vertical edge and usually on the rear of the panel.
IT IS STRONGLY RECOMMENDED THAT THE KERFING AND CUTTING PROCESSES ARE DONE ONLY AFTER the CubeConnects for the project have been received and have been precisely measured to assure an accurate fit.
